cured resin的例句大全

Birefringence of the cured resin was measured with a senarmont compensator.

用塞拿蒙补偿器测定固化树脂的双折射率.

Purposes: Manufacturing hydrogen peroxide, dye intermediates, light-cured resin catalyst, photodegradation membrane, coatings and photosensitive polymerization initiator.

用途: 制造双氧水 、 染料中间体 、 光固化树脂催化剂 、 光降解膜, 涂料和光敏聚合引发剂.

The cured resin had good mechanical properties and moisture resistance.

在促进剂作用下，可以在125℃右固化环氧树脂，固化后的浇铸体有良好的力学性能和耐湿热性。

Cured resin has excellent properties in tensile strength and fracture resistance.

浇注体具有较高的拉伸强度，优异的抗断裂韧性。

Study on the High Reactive UV Cured Resin

高活性UV固化树脂的研究

In Vitro Study of Teeth Fracture Resistance of Different Cured Resin Inlays

树脂嵌体不同固化处理对牙体抗力影响的实验研究

Diethylenetriamine ( DETA), diethylaminopropylamine ( DEPA) and their mixtures were selected as curing agents to study the processing characters of low viscosity bisphenol-F epoxy resin for RTM and mechanical properties of the cured resin systematically.

本文选用二乙烯三胺和二乙氨基丙胺作固化剂，系统地研究了用于RTM工艺的低粘度双酚F型环氧常温固化体系的工艺特性及力学性能。

Objective : To make the dowel nucleus fusion model with self-cured acrylic resin ingot.

目的: 应用自凝胶条及自凝塑胶材料制作桩核熔模.

AIM: To compare the compressive strength, tensile strength and flexural strength of bulkily filled and incrementally filled visible light-cured composite resin.

目的：比较整体固化与分层固化光固化复合树脂的压缩强度、拉伸强度及弯曲强度。

Improving Properties of the Cured Product of Epoxy Resin with Boron-Amine Complexes

环氧树脂&硼胺络合物固化产物性能的改善

However, the high benzoxazine resin curing temperature, low cross-linking density of the cured product, brittle and other defects restrict its application in some special fields.

但是，苯并恶嗪树脂固化温度偏高、固化产物交联密度偏低、性脆等缺陷制约了其在一些特殊领域的应用。

TGA analysis showed that the cured product has a initial decomposition temperature and the end of temperature of 329.4 ℃, 417.5 ℃, which demonstrate that this new epoxy resin have good heat resistance.

用热重分析的方法分析了在此条件下固化产物的分解温度和终止温度分别为329.4℃和417.5℃，这表明所合成的新型环氧树脂具有良好的耐热性能。

The influence of oleoyl polyamine prepared by oleic acid and triethylene-tetramine on the properties of cured product of epoxy resin and methyhetrahydrophthalic anhydride ( MTHPA) was studied.

研究了油酸和三乙烯四胺的生成物油酰多胺对环氧树脂和甲基四氢苯酐固化物性能的影响。

Study on the New Producing Technique and Curing Mechanism of CO_2-Cured Phenolic Resin Binder

新型CO2硬化酚醛树脂粘结剂制备技术及硬化机理的研究